Marine electronics you can trust
Lowrance HDS PRO 10 10" Chartplotter/Fishfinder with C-MAP DISCOVER OnBoard Charts and Active Imaging HD 3-in-1 Transducer (000-15984-001)
The Lowrance HDS PRO 10-inch chartplotter/fishfinder brings a high-brightness SolarMAX HD IPS touchscreen, dedicated keypad controls, and advanced sonar processing together for a connected fishing helm. Its built-in CHIRP and Broadband sonar capabilities work alongside Active Imaging and Active Imaging HD support for detailed structure views with the appropriate transducer hardware. Included C-MAP DISCOVER OnBoard charts provide navigation and fishing-area context, while Ethernet and NMEA 2000 networking connect compatible marine electronics. The display also supports ActiveTarget 2 live sonar, radar integration, and compatible autopilot or trolling-motor controls when the required accessories are added. This bundle includes an Active Imaging HD 3-in-1 transom-mount transducer for CHIRP, SideScan, and DownScan imaging.
Key Features & Benefits
- SolarMAX HD IPS screen: Bright, wide-angle multitouch display with dedicated physical controls.
- Advanced sonar platform: Built-in CHIRP/Broadband and Active Imaging support; optional ActiveTarget 2 integration.
- Preloaded charts: C-MAP DISCOVER OnBoard navigation charting.
- Connected helm: Ethernet, NMEA 2000, Wi-Fi, Bluetooth and compatible radar integration.
- Dual-channel sounder: Independent dual 1 kW-capable sonar outputs when paired with suitable transducers.
Technical Specifications
- Display size: 10 inches
- Display technology: SolarMAX HD IPS multi-touch with keypad
- Display resolution: 1280 x 800
- Maximum brightness: Over 1,200 nits
- Sonar outputs: Two, independently up to 1 kW with suitable transducers
- Supported traditional sonar: CHIRP (Low/Medium/High) and 50/83/200 kHz Broadband depending on transducer
- Standard Active Imaging frequencies: 455/800 kHz
- Active Imaging HD higher frequencies: Requires S3100 sonar module for 1.2 MHz/1075 kHz class imaging
- Live sonar compatibility: ActiveTarget and ActiveTarget 2 with separate modules/transducers
- Included charts: C-MAP DISCOVER OnBoard
- GPS: 10 Hz GPS/GLONASS with augmentation
- Waypoints / routes / trails: 3,000 / 100 / 100
- Ethernet ports: 2 x 100 Mbit, 5-pin
- NMEA 2000: 1 x Micro-C
- NMEA 0183: Via power connector
- Sonar connections: 2
- Memory card slots: 2 x microSD (up to 32 GB per card)
- Wireless: Wi-Fi and Bluetooth 4.0
- Supply voltage: 12 V DC nominal (10.8–17 V DC)
- Ingress protection: IPX7 with card door closed
- Included sonar transducer: Active Imaging HD 3-in-1 transom-mount
Compatibility
Supports compatible Lowrance CHIRP/Broadband and Active Imaging transducers; optional ActiveTarget 2 requires its sonar module and transducer. Integrates with supported HALO radars, Ethernet displays, NMEA 2000 sensors, and suitable autopilot/trolling motor equipment. The included Active Imaging HD 3-in-1 is the standard transducer supplied with this SKU. Higher-frequency enhanced Active Imaging HD functionality requires a separate S3100 module.
Installation Considerations
Connect to 12 V DC through appropriate fuse protection, mount using the supplied bracket or a correctly sized panel cutout, and route sonar/network cabling separately from interference sources. Install the included transom-mount transducer where it stays submerged and clear of aerated water.
Warranty
2-Year Limited Manufacturer Warranty
What's in the Box
- HDS PRO 10 display
- Power/NMEA 0183 cable
- HDS PRO 10 gimbal mounting bracket and knobs
- HDS PRO 10 protective suncover
- Active Imaging HD 3-in-1 transom-mount transducer