Marine electronics you can trust
Simrad xSonic Airmar SS60 12° Tilted Stainless Steel Thru-Hull Transducer - 50/200 kHz, 9-Pin (000-13785-001)
The Simrad xSonic Airmar SS60 is a low-profile stainless steel thru-hull transducer for traditional fishfinding on suitably equipped Simrad sonar systems. Its dual-frequency 50/200 kHz operation provides two established sonar frequencies, allowing anglers to select a useful balance between wider deep-water coverage and finer shallow-water detail. The integrated 12-degree tilted element compensates for hull deadrise without a large external fairing block, simplifying a clean installation on appropriately angled hull bottoms. Simrad identifies this stainless steel SS60 as suitable for smaller sportfishing and commercial vessels up to approximately 25 feet and lists a maximum depth capability of up to 3,000 feet under suitable conditions. This version uses a 9-pin xSonic connection and must be matched to both display sonar support and hull angle.
Key Features & Benefits
- Dual frequency: Traditional 50/200 kHz broadband sonar
- Tilted element: 12° compensation for matching hull deadrise
- Stainless steel housing: Durable, low-profile thru-hull installation
- 9-pin xSonic connection: Direct connection to compatible 9-pin Simrad sonar inputs
- Fishfinding application: Suited to smaller recreational and commercial fishing boats
- Deep-water capability: Manufacturer lists use down to 3,000 ft under appropriate conditions
Technical Specifications
- Manufacturer model: Airmar SS60, 12° tilt
- Transducer type: Traditional broadband sonar
- Operating frequencies: 50/200 kHz
- Installation: Thru-hull, low-profile
- Material: Stainless steel
- Element tilt: 12 degrees
- Connector: 9-pin xSonic
- Manufacturer depth claim: Up to 3,000 ft
- Nominal vessel application: Up to 25 ft
- Dimensions: 84 mm diameter × 95 mm depth (3.3 × 3.75 in)
- Weight: 1.4 kg (3 lb)
Compatibility
For Simrad fishfinders and sonar modules with a compatible 9-pin xSonic input supporting 50/200 kHz traditional sonar. Match the 12-degree element to the hull deadrise and verify hull-material compatibility before purchasing. Not a CHIRP imaging, SideScan or Active Imaging transducer.
Installation Considerations
Thru-hull installation requires drilling, suitable marine sealant, correct orientation and a professional check of hull deadrise and construction. Confirm manufacturer guidance for metal hulls and potential galvanic corrosion.
Warranty
2-Year Limited Manufacturer Warranty