Marine electronics you can trust
Raymarine P79 200kHz Adjustable-Angle In-Hull Depth Transducer for i40/i50/iTC-5 Instruments (E26001-PZ)
The instrument-version P79 provides depth data through a solid hull without a thru-hull opening. Its adjustable mounting base accommodates a range of deadrise angles while transmitting a 200 kHz analog depth signal to compatible Raymarine instruments.
Key Features & Benefits
- No through-hull penetration: In-hull mounting keeps the sensing face inside the boat.
- Adjustable base: Accommodates deadrise angles from 2° to 22°.
- Instrument-specific wiring: Uses push-on female spade connectors for compatible analog instruments.
- Dedicated depth sensing: The in-hull design does not measure water temperature.
Technical Specifications
- Frequency: 200 kHz
- Output: Analog depth
- Mounting: Adjustable-angle in-hull
- Hull deadrise: 2°–22°
- Recommended hull: Solid fiberglass up to 5/8 in. (approximately 16 mm); thin aluminum under 0.125 in. (3.8 mm) as permitted by manufacturer
- Connector: Push-on 1/8 in. female spade terminals
- Water temperature: Not supported
- Speed sensing: Not supported
Compatibility
For Raymarine i40 Depth, i50 Depth, iTC-5 and compatible legacy analog-depth instruments. Does not plug directly into SeaTalkng or NMEA 2000; using an iTC-5 or other approved instrument interface can provide data to a network. Do not confuse with P79 fishfinder SKU E66008 or P79S smart models.
Installation Considerations
Mount only where the hull structure permits acoustic transmission. Avoid cored or sandwich hull areas and air gaps beneath the sensing face. Align the adjustable mounting base according to the installation instructions.
Manufacturer Warranty
Raymarine 2-Year Limited Warranty. Eligible new products may qualify for an extension to 3 years when registered with Raymarine within 90 days of purchase.
What's in the Box
- P79 analog instrument in-hull depth transducer
- Adjustable-angle in-hull mounting base